অগ্রিম ছাড়াই অর্ডার করুন

What each of the three functions actually does

Backrest adjustment raises the head and upper body section from flat up to approximately 75 degrees. Sitting a patient up for meals, conversation, or respiratory support — all of these become straightforward with a properly adjusted backrest.

Leg rest adjustment raises the foot section from flat to approximately 30 degrees. Elevating the legs reduces pooling of blood in the lower limbs, lowering the risk of edema (swelling) and improving circulation. For a patient spending long periods in bed, this is a meaningful clinical benefit that a fixed-frame bed can’t provide.

Height adjustment raises or lowers the entire bed between 45 and 90 centimeters. This matters most for the caregiver — a tall caregiver can raise the bed to a comfortable working height, while a shorter caregiver can lower it. Not having to stoop while performing daily care tasks significantly reduces the risk of back injury over weeks or months. It also makes transferring a patient in or out of bed safer when the bed can be lowered.

Manual or electric — which one to choose

Choose a manual 3-function bed if position changes are needed no more than 3–4 times a day, if power cuts are a concern, or if budget is a priority. A manual bed’s crank mechanism, properly maintained, will last many years — and with no motor or electrical components, there’s nothing to service or replace electrically.

Choose an electric 3-function bed if the patient wants to control their own position independently using a remote, if the caregiver is physically frail or elderly, or if frequent position changes throughout the day are required. Electric beds cost significantly more upfront and may require motor servicing over time.

Crank quality — the detail almost nobody mentions

The crank system is the most important mechanical component of a manual 3-function bed. A quality crank turns smoothly, locks firmly at any set angle, and doesn’t loosen with regular use over years. Cheaper beds may feel fine initially but become difficult to crank or fail to hold position within six months. When checking a bed in person, turn the cranks by hand — they should move without effort and lock without play. Ask specifically about the warranty on the crank mechanism.

Frame material and finishing

Most 3-function manual beds on the Bangladesh market use mild steel frames. The meaningful difference comes in the finishing — standard spray paint versus electrostatic epoxy powder coating. Epoxy powder coating holds up far better in Bangladesh’s humid climate, with significantly lower rust risk over time. Ask about the finishing type before buying.

Load capacity — why the number matters

A 3-function manual bed typically supports 200–240 kg, but this varies by model. Choose a bed rated at least 20–25 kg above the patient’s actual weight — height adjustment puts extra mechanical stress on the frame compared to a fixed bed, and capacity limits are reached faster under that stress. The height adjustment mechanism is usually the first component to show wear when a bed is consistently overloaded.

Measure before you order

Most 3-function beds are 88–96 cm wide. A doorway width of at least 90 cm is needed for safe entry. If the bed needs to go to an upper floor or through a narrow corridor, ask whether the headboard and footboard can be detached for assembly on-site — many models allow this.

An air mattress is essential for fully bedridden patients

A 3-function bed adjusts position, but for a patient who cannot reposition themselves at all, a standard foam mattress is not enough to prevent pressure sores. An alternating pressure air mattress should be budgeted for alongside the bed purchase — it’s the most effective way to protect skin integrity over long-term bed rest.

Delivery and installation

A hospital bed is not self-assembly furniture — a poorly assembled bed means cranks don’t lock correctly and side rails sit loose. Ensure professional installation at delivery and personally test all three functions before the installer leaves: backrest up and down, leg rest lock, and full height range.

Buy or rent

For post-surgery recovery or short-term needs of 1–3 months, renting is more cost-effective. For care needs beyond 6 months, buying is better — a few months of rental cost approaches the price of a new 3-function bed.

Frequently Asked Questions

What is the 3 function hospital bed price in Bangladesh?
Manual versions from ৳32,000–45,000 and electric versions from ৳65,000–1,20,000, depending on brand and accessories included.

What is the difference between a 2-function and 3-function bed?
A 3-function bed adds height adjustment to the backrest and leg rest of a 2-function bed — the height feature is the most significant practical difference for caregivers.

Manual or electric — which is better?
Manual for budget-conscious buyers or situations with power cut concerns. Electric when the patient wants independent control or the caregiver is physically limited.

Is a mattress included?
Depends on the model — always confirm before ordering.

Is a standard foam mattress enough for a fully bedridden patient?
No — an alternating pressure air mattress should be used alongside the bed to prevent pressure sores.

Is home delivery and installation available?
Yes, home delivery and professional installation are available within Dhaka.

What minimum doorway width is required?
At least 90 cm — ask about on-site assembly options if access is tight.